Car Rim

 When buying a set of tires or wheels from 4pcs. Read the terms of the promotion in "More"
The main indicator that should be known to the car owner for the choice of rims is, of course, size. The rims for the wheels of your car are selected taking into account the size of the rim itself, the landing size of the car tire and the mounting dimensions. The combination of indicators of the size of the rim and tire is usually called the dimension "rim-tire", the mounting dimensions - "wheel-car".
The generally accepted diameter grid for mounting rims on passenger cars and SUVs ranges from 10 to 24 inches. The majority of cars are fitted with 13, 14, 15, 16 inch disks.
Among car owners, the trend towards an increase in the size of the disc, which is installed on the car by the manufacturer, has become more and more popular - motorists change the size of the disc from 13 to 14, from 14 to 15, and so on. This is done in order to improve the driving qualities of the car, low-profile tires contain less rubber and more metal in the starting material. If the disks are steel, the mounting dimension is not always possible to increase;  Car Rim if this is done, the weight of the wheel increases significantly. The best option is the use of light-alloy wheels - they do not make the weight of the wheel heavier and allow you to increase the mounting diameter.
Sports cars should be fitted with larger rims than conventional cars. For example, for a sporty BMW M-3, rims of at least 17 inches are needed.
The width of the wheel rim for a passenger car often does not exceed the values: 3.5, 4.0, 4.5, 5.0, 5.5, 6.0 and 6.5 inches, and in some cases rims with a width of 7 up to 13.5 inches. Typically, this width is used to fit sports and off-road vehicles, as well as small trucks.
.
 20195 / 70R15.
The operation of very wide or too narrow rims is highly undesirable because:
The maximum permissible deviation in the width of the rim, which is acceptable for passenger cars, is no more than 0.5 - 1 "(for a disc up to 14"), 1-1.5 (for a disc of 15 "or more). It is best to purchase a wheel rim exactly for the width of the rubber.
The main mounting dimensions of the wheel rim include the following parameters:
For example, PCD 100/4 has 4 bolt holes on a total diameter of 100 mm.
Attention! Never install wheel rims with an abnormal offset. The shorter the outreach, the wider the vehicle's overall track. This gives the overall stability and aggressive look of the car, but unnecessarily loads the suspension, hubs and axle shafts. Accordingly, it is not possible to reduce the overhang in the same way as the wheel tires rest against the suspension element or the brake disc.
The main marking is most often knocked out on the face of the disc. Depending on the country of manufacture, the place of application may vary, as well as the designation symbols.
Typical Marking Example: 7 1 / 2Jx15H2

https://jiji.co.rw/kigali/car-parts-and-accessories/car-rim-ikyUvHJqoPIvKk1NtPj1wHfu.html

Comments

Popular posts from this blog

Toyota Rav4 and 8 Seater Van for Rent

Nike Air Slippers

Unfurnished house for Rent at Kacyiru